1. Characteristics
| Product | Grade | Temper | Thickness mm | Width mm | Surface |
| Double Zero Foil | 1235 1145 8011 8079 | H18 O | 0.006-0.009 | 200-1700 | One side bright |
| Household Foil | 1235 8011 1145 | O | 0.009-0.02 | 200-1700 | One side bright |
| Pharmacy Foil | 1235 8011 | H18 | 0.009-0.03 | 200-1700 | One side bright |
| Container Foil | 3003 8011 8021 | H22 H24 O | 0.04-0.2 | 200-1700 | Two sides bright |
| Beer Mark Foil | 1235 8011 | O | 0.009-0.011 | 200-1700 | One side bright |
| Air Conditioner Foil | 3102 8011 8006 | O H22 H24 | 0.08-0.15 | 200-1700 | Two sides bright |
| Food Soft Packing Foil | 8011 1235 1145 | O | 0.009-0.023 | 200-1700 | One side bright |
2. production standard :as per international standard ASTM OR EN standard ,
all chemical composition ,mechanical property ,size tolerance ,flat tolerance ,etc strictly as per ASTM OR EN standard
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Al | |
| Single | Total | ||||||||||
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | _ | 0.05 | 0.03 | 0.03 | _ | ≥99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | _ | 0.05 | 0.03 | 0.03 | _ | ≥99.6 |
| 1100 | Si+Fe:0.95 | 0.05~0.40 | 0.05 | _ | _ | 0.1 | _ | 0.05 | 0.15 | ≥99 | |
| 1200 | Si+Fe:1.00 | 0.05 | 0.05 | _ | 0.1 | 0.05 | 0.05 | 0.15 | ≥99 | ||
| 3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | _ | _ | 0.1 | _ | 0.05 | 0.15 | Remainder |
| 3105 | 0.6 | 0.7 | 0.3 | 0.30~0.8 | 0.20~0.8 | 0.2 | 0.4 | 0.1 | 0.05 | 0.15 | Remainder |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50~1.1 | 0.1 | 0.25 | _ | 0.05 | 0.15 | Remainder |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | 0.1 | _ | 0.05 | 0.15 | Remainder |
| 5083 | 0.4 | 0.4 | 0.1 | 0.40~1.0 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | Remainder |
| 5086 | 0.4 | 0.5 | 0.1 | 0.20~0.7 | 3.5~4.5 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | Remainder |
| 6061 | 0.4~0.8 | 0.7 | 0.15~0.40 | 0.15 | 0.80~1.20 | 0.04~0.35 | 0.25 | 0.15 | 0.05 | 0.15 | Remainder |
| 6063 | 0.2~0.6 | 0.35 | 0.1 | 0.1 | 0.45~0.90 | 0.1 | 0.1 | 0.1 | 0.05 | 0.15 | Remainder |
| 6082 | 0.7~1.3 | 0.5 | 0.1 | 0.4~1.0 | 0.6~1.2 | 0.25 | 0.2 | 0.1 | 0.05 | 0.15 | Remainder |
| 8011 | 0.5~0.9 | 0.6~1.0 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | 0.08 | 0.05 | 0.15 | Remainder |
Master industrial aluminum coil selection. Compare 3003 vs 5052 alloys and decode tempers to prevent costly failures and optimize production.
Prevent heat exchanger failures. Master aluminum tube selection with this engineer's guide to alloys, microchannel tech, and fluid compatibility.
Master spherical tank procurement for high-volume gas storage. Navigate ASME codes, optimize sizing, and vet fabricators to minimize CAPEX.
Secure critical nuclear power forgings. Learn to evaluate heavy forging suppliers, verify metallurgical integrity, and mitigate supply chain risks.
Slash exotic alloy costs in corrosive environments. Compare explosion bonded clad plates vs solid alloys for heavy-wall pressure vessels.
Optimize tower packing efficiency. Compare metal random packing vs structured packing to boost capacity, reduce pressure drop and manage fouling.





